تفاصيل المنتج:
شروط الدفع والشحن:
|
مادة: | الألومنيوم | فئة الملكية: | 5052 |
---|---|---|---|
ينهي: | أكسدة | اللون: | أسود |
خشونة: | Ra2.0 | طول: | 50 |
أقصى قطر: | 12 | تفاوت: | ISO 2768 |
تسليط الضوء: | الأجزاء المعدنية المشكَّلة,وأجزاء المعالجة المعدنية,والأطقم المشتركة لوحدة منظار المعدة من الألومنيوم |
M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings
Aluminum gastroscope unit joint kits are comprised of bushing ,header and joint pipe , these parts are assembly together as a full gastroscope connector , at the end of gastroscope has a threaded section for fixing into other pieces for holding unit joint kits .
Material for gastroscope unit joint kits turned part
Gastroscope unit joint kits turned part is made of aluminum that meets light weight but with enough tensile strength requirements .
Cu | Zn | Mg | Fe | Mn | Cr | Si | Al |
0.3 | 0.25 | 1 | 0.7 | 0.15 | 0.1 | 0.5 | balance |
Chemical element for unit joint kits
Dimensions for gastroscope unit joint kits turned part
Bushing | |
Bushing length | 25 |
Bushing hole | 15 |
Bushing diameter | 19.5 |
Thread for bushing | M10 |
Header | |
Length | 35 |
Diameter | 18 |
Hole diameter | 10 |
Joint pipe | |
Length | 60 |
Diameter | 19.5 |
Hole diameter | 10 |
Thread | M10 |
Unit : mm
Standard for unspecified tolerances
Tolerances for gastroscope unit joint kits turned part normally are +/-0.05 mm and unspecified tolerances are based on ISO 2768-m with f level .
Level | 0.5-0.3 | 3-6 | 6-30 | 30-120 | 120-400 | 400-1000 | 1000-2000 | 2000-40000 |
f | ±0.05 | ±0.05 | ±0.1 | ±0.15 | ±0.2 | ±0.3 | ±0.5 | - |
Linear tolerances
Level | 0.5-0.3 | 3-6 | Above 6 |
f | ±0.2 | ±0.5 | ±1 |
Radius and chamfer tolerances
Level | 0-10 | 10-50 | 50-120 | 120-400 | above 400 |
f | ±1° | ±0°30' | ±0°20' | ±0°10' | ±5° |
Angle tolerances
Finish for gastroscope unit joint kits turned part
Black oxidation with bright surface .
Mechanical property for gastroscope unit joint kits turned part
Tensile strength σb (MPa) | 310 |
Yield Strength σs (MPa) | 276 |
Elongation δ 0.2 (%) | 12 |
Reduction of area ψ (%) | 25 |
Physical performance for gastroscope unit joint kits turned part
Specific heat capacity(0~100℃,KJ·kg-1K-1) | 896 |
Heat conductivity(W·m-1·K-1) | 43 |
RResistivity(20℃,10-6Ω·m) | 0.059 |
Density g/cm3) | 2.73 |
Characteristics for gastroscope unit joint kits turned part
1 , Strict dimensions with small tolerances
2 , Black oxidation with RoHS comply
3 , No burrs and scratch
4 , Harden material
5 , Corrosion resistant
We have more than ten years experience on customized turned parts with CNC and Auto lathe parts , products are used to different fields in industry , if you have any interesting on our product , please contact us soon .
اتصل شخص: MR.LIN
الهاتف :: +8613556778272